Table of Contents
Setup Arrow On Apple Device
1. After powering on the Arrow Device, go to the Bluetooth settings screen on your apple device and select the Arrow device.
2. Now sign into Diamond Maps and turn on GPS using the Yellow GPS button on the right side of the screen. Test to make sure it is using the Arrow device and not the apple devices location. To test leave the Arrow device in one location and walk away from it with the apple device and make sure the yellow dot on the screen doesn't move.
Click Here for more GPS setup instructions
Some phone and tablet operating systems will never report an accuracy better than 10 feet or more despite the fact that you are receiving a high accuracy position from the GPS. If you have performed the test in step 7 above to confirm that you are in-fact tracking the Arrow and not your phone/tablet's on-board GPS then you should ignore this mis-reported accuracy value.